Scan Speak 18W/8545K00 Classic

Scan Speak 18W/8545K00 Classic

Scan Speak Promotion

176,61 € *

inkl. MwSt. zzgl. Versandkosten

Lieferzeit 2-5 Werktage

Gesamtpreis:  €176,61 € *  €189,90 € * (7% gespart)
Stück
  • sp188545k0
Scan Speak 18W/8545K00 Tief-/Mitteltöner The Symmetric Drive (SD-1) concept with copper... mehr
Produktinformationen "Scan Speak 18W/8545K00 Classic"

Scan Speak 18W/8545K00 Tief-/Mitteltöner

The Symmetric Drive (SD-1) concept with copper in the magnet system was invented by Scan-Speak. High-quality magnet system design has thus been a key feature of Scan-Speak design since the companys inception. The Classic woofers are highly praised, and are used in some of the worlds most exceptional high-end Loudspeakers. Some feature Kevlar cones others have the innovative Carbon fibre paper cones.

T-S Parameters:

  • Resonance frequency [fs]: 28 Hz
  • Mechanical Q factor [Qms]: 5.20
  • Electrical Q factor [Qes]: 0.30
  • Total Q factor [Qts]: 0.28
  • Force factor [Bl]: 8.2 Tm
  • Mechanical resistance [Rms]: 0.69 kg/s
  • Moving mass [Mms]: 20.5 g
  • Suspension compliance [Cms]: 1.58 mm/N
  • Effective diaph. diameter [D]: 136 mm
  • Effective piston area [Sd]: 145 cm²
  • Equivalent volume [Vas]: 46.4 l
  • Sensitivity (2.83V/1m): 87.5 dB
  • Ratio Bl/√Re: 3.50 N/√W
  • Ratio fs/Qts: 99 Hz

Electrical Data:

  • Nominal impedance [Zn]: 8 Ω
  • Minimum impedance [Zmin]: 6.6 Ω
  • Maximum impedance [Zo]: 101 Ω
  • DC resistance [Re]: 5.5 Ω
  • Voice coil inductance [Le]: 0.4 mH

Power Handling:

  • 100h RMS noise test (IEC 17.1): 100 W
  • Long-term max power (IEC 17.3): - W

Voice Coil and Magnet Data:

  • Voice coil diameter: 42 mm
  • Voice coil height: 19 mm
  • Voice coil layers: 2
  • Height of gap: 6 mm
  • Linear excursion: ± 6.5 mm
  • Max mech. excursion: ± 10 mm
  • Unit weight: 2.3 kg

 

Weiterführende Links zu "Scan Speak 18W/8545K00 Classic"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Scan Speak 18W/8545K00 Classic"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Zuletzt angesehen